Table of Contents
Advertisement
The SETUP Program
9.8 VERIFYING THE SETUP FILE
Use the "=" 114 command to verify that the group setups correctly match the hardware configuration
of the HP 3421A Data Acquisition/Control Unit connected to the HP-71. This command should be used
when an existing setup file has been retrieved from storage, prior to running the LIJ5 program.
If errors are encountered in the group setups, the commands in the edit menu may be used to adjust the
group specifications.
To use the "'=t" if 4 command, press
from the main menu:
Edit File Merifo Goi?
Grog
1...
Edit File YWeritg Cait?
The main menu.
Press
to select the "=r 11 'J4 command.
As each group is examined, the program displays a status
message.
If an error is encountered, it will be printed,
then the program will proceed to the next group.
When all of the groups have been examined, the program
returns to the main menu.
9-15
Advertisement
Table of Contents
