Table of Contents
Advertisement
THE REPORT PROGRAM
The FEFOET program reads files generated by the STE IF, MOM I TOR, and LIJIS programs and prepares
printed reports. The options for report generation are:
e List the contents of the file.
e Print the data in the file.
e Print strip chart from data in specific channel(s).
e¢ Generate summary statistics from the data.
The list option indicates what program generated the file, the number of groups in the file, the channels
scanned, and the time period covered during the experiment.
Each print option allows data to be printed from the entire file or from a particular time period during
the experiment.
The print and statistics options will work with any 80-column output device, such as a video monitor or a
ThinkJet printer.
The strip chart option assumes the printer is a ThinkJet. (If an alternate printer is to
be used for printing strip charts refer to appendix F, "Alternative Peripheral Options".)
To generate printed reports, set the FE IMTEF IS setting in the HP-71 to the desired output device,*
and run the FEFCET program.
FLM REFORET
[ENDLINE
Run the REFFET program.
File name?
The program asks for the name of the datafile to read.
file name ENDLINE
Enter the file name, including the device specifier if
needed, and press
ENDLINE | . Entering a null file name
will end the program.
Chet
L=t
Prt
Stat
End?
This is the main menu.
[C), [IL][P}, [S), or
Press
to print a strip chart,
to list the contents of the
file, [P] to print the data,
to generate summary
statistics, or
to end the program.
*If the printer is in a nonstandard print mode the F/I [ITH setting may have to be adjusted to
match.
11-1
Advertisement
Table of Contents
