Table of Contents
Advertisement
6.10 REPLACING A TRACE
Strip Chart Program
The Fe pl ace command is used to alter the specifications for a trace in the current setup.
To use the F=fp1 &=& command, press [R] from the edit menu:
Hdd Del Epl
Fret
Mair'
Feplace trac
trace number ENDLINE
Replace trace al
Te
[or N
+
%
Trace
pn
0%
Hdd [Del Eel
Frt
Maim™
The edit menu.
Press [R] to select the F=f 1 ae command.
The program prompts for the trace to be replaced.
Enter the trace number, and press ENDLINE | .
The program asks if you wish to replace the trace.
Press
to replace the trace, or
to return to the edit
menu.
The
program
begins
to
prompt
for
the
new
setup
information. Follow the same procedure for trace entry as
described under the Hz command.
When the new specifications for the channel have been
entered, the program returns to the edit menu.
6-15
Advertisement
Table of Contents
