Table of Contents
Advertisement
The SETUP Program
9.4.2 Digital Functions
Two digital input functions are available: digital bit, and digital byte:
Digital Bit
First chanrnel™
first bit address ENDLINE
Last channel?
last bit address ENDLINE
The program prompts for the first input bit to be scanned.
Enter the address of the first bit, and press [ENDLINE].
The program prompts for the last bit to be scanned.
Enter the address of the last bit, and press ENDL INE | .
When these specifications have been entered, proceed to subsection 9. 5, "Limits."
Digital Byte
slot number ENDLINE
Lomwer=sion CHa
[or [N
File name?
file name ENDL INE
The program asks which slot to read a byte from.
The
readings from the digital card are returned as a decimal
value in the range 0 - 253.
Enter the slot number for a digital card and press
ENDLINE J .
The program asks if a conversion subprogram should be
called (for example, to decode readings from a BCD
device).
Press
if a conversion subprogram is needed.
If a conversion is requested, the program prompts for the
name of the subprogram.
Enter the name of the subprogram and press ENDLINE | .
If a conversion is requested, the program prompts for the
name of the file containing the subprogram.
Enter the name of the file and press ENDL INE | .
When these specifications have been entered, proceed to subsection 9. 5, "Limits."
9-8
Advertisement
Table of Contents
