Table of Contents
Advertisement
Strip Chart Program
6.6 RETRIEVING STRIP CHART SETUPS
Use the 1. command to retrieve a strip chart setup from storage. Note that when this command is used,
any currently-active setup information will be lost!
To use this command, press
from the file menu:
Get Hew Saue Ver Main?
Oeztroy
zetup
OYSHT
[Yor NI
GET:
File name?
file name ENDL INE
Fead img. . .
Edit File Fun git?
The file menu.
Press
to select the G=t command.
If a setup currently exists, the program reminds you that it
will be destroyed.
Press
to proceed, or
to escape back to the main
menu.
The program prompts for the name of the file to read.
Enter the file name and, if needed, the optional mass
storage specifier, then press ENDLINE | .
The program displays a status message while the file is
being read.
The program returns to the main menu.
Advertisement
Table of Contents
