FusionModule1000A40 Prefabricated All-in-One
Data Center
Maintenance Guide
4.
Step 14 Install a new smart cooling product.
1.
2.
3.
----End
5.2.3 Replacing a T/H Sensor
Prerequisites
●
●
Context
A T/H sensor can be maintained only from the rear door.
Issue 04 (2021-02-10)
Figure 5-19 Moving the smart cooling product
Move the smart cooling product out of the pre-fab.module using a forklift.
Install the new smart cooling product, and connect structural kits, pipes, and
cables.
Perform power-on commissioning for the smart cooling product to verify that
the new smart cooling product is working properly. For details, see documents
delivered with the smart cooling product.
Reinstall the removed components.
A T/H sensor needs to be replaced.
A spare T/H sensor of the same model is available and functional.
Copyright © Huawei Technologies Co., Ltd.
5 Parts Replacement
75