Changed Parameters Mode - ABB ACS355 series User Manual

98 Control panels


Changed parameters mode

In the Changed parameters mode, you can:
• view a list of all parameters that have been changed from the macro default
values
• change these parameters
• start, stop, change the direction and switch between local and remote control.
How to view and edit changed parameters
Step Action
1. Go to the Main menu by pressing
Output mode, otherwise by pressing repeatedly
you get to the Main menu.
2. Go to the Changed parameters mode by selecting
CHANGED PAR on the menu with keys
and pressing
3. Select the changed parameter on the list with keys
and . The value of the selected parameter is shown
below it. Press
4. Specify a new value for the parameter with keys
and .
Pressing the key once increments or decrements the
value. Holding the key down changes the value faster.
Pressing the keys simultaneously replaces the displayed
value with the default value.
5. • To accept the new value, press
is the default value, the parameter is removed from the
list of changed parameters.
• To cancel the new value and keep the original, press
CANCEL
.
ENTER
.
EDIT
to modify the value.
MENU
if you are in the
EXIT
until
and
SAVE
. If the new value
Display
LOC MAIN MENU
PARAMETERS
ASSISTANTS
CHANGED PAR
EXIT 00:00
LOC CHANGED PAR
,
1202 CONST SPEED 1
10.0 Hz
1203 CONST SPEED 2
1204 CONST SPEED 3
9902 APPLIC MACRO
EXIT 00:00
LOC PAR EDIT
1202 CONST SPEED 1
10.0 Hz
00:00
CANCEL
LOC PAR EDIT
1202 CONST SPEED 1
15.0 Hz
00:00
CANCEL
LOC CHANGED PAR
1202 CONST SPEED 1
15.0 Hz
1203 CONST SPEED 2
1204 CONST SPEED 3
9902 APPLIC MACRO
00:00
EXIT
1
ENTER
EDIT
SAVE
SAVE
EDIT