Analog Outputs - ABB ACS355 series User Manual

208 Actual signals and parameters
All parameters
No. Name/Value
1405 RO 1 OFF
DELAY
0.0...3600.0 s
1406 RO 2 ON
DELAY
1407 RO 2 OFF
DELAY
1408 RO 3 ON
DELAY
1409 RO 3 OFF
DELAY
1410 RELAY
OUTPUT 4
1413 RO 4 ON
DELAY
1414 RO 4 OFF
DELAY
15 ANALOG
OUTPUTS
1501 AO1
CONTENT SEL
x...x
1502 AO1
CONTENT MIN
x...x
Description
Defines the release delay for relay output RO 1.
Delay time. See the figure for parameter
DELAY.
See parameter 1404 RO 1 ON
See parameter 1405 RO 1 OFF
See parameter 1404 RO 1 ON
See parameter 1405 RO 1 OFF
See parameter 1401 RELAY OUTPUT
the MREL-01 output relay extension module is connected to
the drive. See parameter
See parameter 1404 RO 1 ON
See parameter 1405 RO 1 OFF
Selection of the actual signals to be indicated through
analog output and output signal processing.
Connects a drive signal to analog output AO.
Parameter index in group
example, 102 = 0102
Defines the minimum value for the signal selected with
parameter 1501 AO1 CONTENT
AO minimum and maximum correspond to the
MINIMUM AO1 and 1505 MAXIMUM AO1
follows:
AO (mA)
1505
1504
1502 1503
Setting range depends on the parameter
CONTENT SEL setting.
1404 RO 1 ON
DELAY.
DELAY.
DELAY.
DELAY.
1. Available only if
0181 EXTENSION.
DELAY.
DELAY.
01 OPERATING
SPEED.
SEL.
AO (mA)
1505
1504
1503
AO
content
1501 AO1
Def/FbEq
0.0 s
1 = 0.1 s
0.0 s
0.0 s
0.0 s
0.0 s
NOT SEL
0.0 s
0.0 s
103
DATA. For
-
1504
settings as
1502 AO
content
-