ABB ACS355 series User Manual page 193

All parameters
No. Name/Value
COUNTR
START
SEQ PROG
1002 EXT2
COMMANDS
1003 DIRECTION
FORWARD
REVERSE
REQUEST
1010 JOGGING SEL Defines the signal that activates the jogging function. See
DI1
DI2
DI3
DI4
DI5
COMM
NOT SEL
DI1(INV)
DI2(INV)
DI3(INV)
DI4(INV)
DI5(INV)
Description
Start when counter limit defined by parameter
COUNTER LIMIT has been exceeded. Stop with counter
stop signal. Source for the signal is selected by parameter
1911 CNTR S/S COMMAND.
Start, stop and direction commands through Sequence
programming. See parameter group
PROG.
Defines the connections and the source for the start, stop
and direction commands for external control location 2
(EXT2).
See parameter 1001 EXT1
Enables the control of rotation direction of the motor, or fixes
the direction.
Fixed to forward
Fixed to reverse
Control of rotation direction allowed
section Control of a mechanical brake
Digital input DI1. 0 = jogging inactive, 1 = jogging active.
See selection DI1.
See selection DI1.
See selection DI1.
See selection DI1.
Fieldbus interface as the source for jogging 1 or 2
activation, ie, Control word
and 21. The Control word is sent by the fieldbus controller
through the fieldbus adapter or embedded fieldbus
(Modbus) to the drive. For the Control word bits, see section
DCU communication profile
Not selected
Inverted digital input DI1. 1 = jogging inactive, 0 = jogging
active.
See selection DI1(INV).
See selection DI1(INV).
See selection DI1(INV).
See selection DI1(INV).
Actual signals and parameters 193
1905
84 SEQUENCE
COMMANDS.
on page 159.
0302 FB CMD WORD 2
on page 333.
Def/FbEq
25
26
NOT SEL
REQUES
T
1
2
3
NOT SEL
1
2
3
4
5
6
bits 20
0
-1
-2
-3
-4
-5