Basic Control Panel Alarm Codes - ABB ACS355 series User Manual

How to upload and download parameters
For the upload and download functions available, see above. Note that the drive has
to be in local control for uploading and downloading.
Step Action
1. Go to the Main menu by pressing
the Output mode, otherwise by pressing
repeatedly until you see MENU at the bottom. – If
REM is shown on the left, press first
local control.
2. If the panel is not in the Copy mode ("CoPY" not
visible), press key
"CoPY".
Press .
3. To upload all parameters (including user sets) from
the drive to the control panel, step to "uL" with keys
and
Press . During the transfer, the display shows
the transfer status as a percentage of completion.
To perform downloads, step to the appropriate
operation (here "dL A", Download all, is used as an
example) with keys
Press . During the transfer, the display shows
the transfer status as a percentage of completion.


Basic control panel alarm codes

In addition to the faults and alarms generated by the drive (see chapter
on page 349), the basic control panel indicates control panel alarms with a code of
form A5xxx. See section
a list of the alarm codes and descriptions.
or until you see
.
and .
Alarms generated by the basic control panel
if you are in
LOC
to switch to
LOC
REM
LOC
LOC
LOC
LOC
LOC
LOC
Control panels 85
Display
PAr
MENU FWD
CoPY
MENU FWD
uL
MENU FWD
uL
MENU FWD
uL 50
FWD
dL A
MENU FWD
dL 50
FWD
Fault tracing
on page 354
%
%
for