What This Chapter Contains - ABB ACS355 series User Manual

Fault tracing

What this chapter contains

The chapter tells how to reset faults and view the fault history. It also lists all alarm
and fault messages including the possible cause and corrective actions.
Safety
WARNING! Only qualified electricians are allowed to maintain the drive. Read
the safety instructions in chapter
drive.
Alarm and fault indications
A fault is indicated with a red LED. See section
An alarm or fault message on the panel display indicates an abnormal drive status.
Using the information given in this chapter, most alarm and fault causes can be
identified and corrected. If not, contact your local ABB representative.
To display the alarms on the control panel, set parameter
value 1 (YES).
The four-digit code number in parenthesis after the fault is for the fieldbus
communication. See chapters
and Fieldbus control with fieldbus adapter
Safety on page
LEDs
Fieldbus control with embedded fieldbus
on page 339.
Fault tracing 349
15
17 before you work on the
on page 372.
1610 DISPLAY ALARMS
on page
to
313