ABB ACS355 series User Manual page 301

All parameters
No. Name/Value
8423 ST1 OUT
CONTROL
RO2=RO3
=RO4=1
RO2=1, RO3=1 Relay outputs are energized (closed). Effective only with the
RO4 = 1
RO3 = 1
RO2 = 1
RST CNT
NEXT
RST CNT ENT Reserved for ESP.
RST CNT
STNX
R=0,D=1,AO=0 Relay output is de-energized (opened), transistor output is
R=1,D=0,AO=0 Relay output is energized (closed), transistor output is de-
R=0,D=0,AO=0 Relay and transistor outputs are de-energized (opened) and
RO=0,DO=0
RO=1,DO=1
DO=1
RO=1
Description
Selects the relay, transistor and analog output control for
Sequence programming state 1.
The relay/transistor output control must be activated by
setting parameter 1401 RELAY OUTPUT 1
SIGNAL to SEQ PROG. Analog output control must be
activated by parameter group
Analog output control values can be monitored with signal
0170 SEQ PROG AO
Relay outputs are energized (closed). Effective only with the
MREL-01 option.
MREL-01 option.
Relay output is energized (closed). Effective only with the
MREL-01 option.
Relay output is energized (closed). Effective only with the
MREL-01 option.
Relay output is energized (closed). Effective only with the
MREL-01 option.
Reserved for Enhanced Sequence Program (ESP).
Reserved for ESP.
energized and analog output is cleared.
energized and analog output is cleared.
analog output value is set to zero.
Relay and transistor outputs are de-energized (opened) and
analog output control is frozen to the previously set value.
Relay and transistor outputs are energized (closed) and
analog output control is frozen to the previously set value.
Transistor output is energized (closed) and relay output is
de-energized. Analog output control is frozen to the
previously set value.
Transistor output is de-energized (opened) and relay output
is energized. Analog output control is frozen to the
previously set value.
Actual signals and parameters 301
15 ANALOG
VAL.
Def/FbEq
AO=0
/ 1805 DO
OUTPUTS.
-1.5
-1.4
-1.3
-1.2
-1.1
-1.0
-0.8
-0.9
-0.7
-0.6
-0.5
-0.4
-0.3
-0.2
-0.1