Programmable Analog Output - ABB ACS355 series User Manual

Programmable analog output

One programmable current output (0...20 mA) is available. Analog output signal can
be inverted, filtered and the maximum and minimum values can be adjusted. The
analog output signals can be proportional to motor speed, output frequency, output
current, motor torque, motor power, etc. The update cycle for the analog output is
2 ms.
Analog output can be controlled with Sequence programming. It is also possible to
write a value to an analog output through a serial communication link.

Settings
Parameter
Group 15 ANALOG OUTPUTS
Group 35 MOTOR TEMP MEAS
8423/8433/.../8493

Diagnostics
Actual signal
0124
0170
Fault
PAR AO SCALE
Additional information
AO value selection and processing
AO in motor temperature measurement
AO control with Sequence programming
Additional information
AO value
AO control values defined by Sequence programming
Incorrect AO signal scaling
Program features 133
(1503 < 1502)