ABB ACS355 series User Manual page 192

192 Actual signals and parameters
All parameters
No. Name/Value
KEYPAD
DI1F,2R
COMM
TIMED FUNC 1 Timed start/stop control. Timed function 1 active = start,
TIMED FUNC 2 See selection
TIMED FUNC 3 See selection
TIMED FUNC 4 See selection
DI5
DI5,4
TIMER STOP
TIMER START Start when timer delay defined by parameter
COUNTER
STOP
Description
Start, stop and direction commands through control panel
when EXT1 is active. To control the direction, parameter
1003 DIRECTION setting must be REQUEST.
Start, stop and direction commands through digital inputs
DI1 and DI2.
DI1 DI2 Operation
0 0 Stop
1 0 Start forward
0 1 Start reverse
1 1 Stop
Parameter 1003 DIRECTION
Fieldbus interface as the source for the start and stop
commands, ie, Control word
0...1. The Control word is sent by the fieldbus controller
through the fieldbus adapter or embedded fieldbus
(Modbus) to the drive. For the Control word bits, see section
DCU communication profile
timed function 1 inactive = stop. See parameter group
TIMED FUNCTIONS.
TIMED FUNC
TIMED FUNC
TIMED FUNC
Start and stop through digital input DI5. 0 = stop, 1 = start.
Direction is fixed according to parameter
(setting REQUEST = FORWARD).
Start and stop through digital input DI5. 0 = stop, 1 = start.
Direction through digital input DI4. 0 = forward, 1 = reverse.
To control direction, parameter
REQUEST.
Stop when timer delay defined by parameter
DELAY has passed. Start with timer start signal. Source for
the signal is selected by parameter
DELAY has passed. Stop when timer is reset by parameter
1903 TIMER RESET.
Stop when counter limit defined by parameter
COUNTER LIMIT has been exceeded. Start with counter
start signal. Source for the signal is selected by parameter
1911 CNTR S/S COMMAND.
setting must be REQUEST.
0301 FB CMD WORD 1
on page 333.
1.
1.
1.
1003 DIRECTION
1003 DIRECTION
1901 TIMER
1902 TIMER
1901 TIMER
1905
Def/FbEq
8
9
10
bits
11
36
12
13
14
20
21
must be
22
START.
23
24