Programmable Analog Inputs; Update Cycles In The Control Program; Settings; Diagnostics - ABB ACS800 Series Firmware Manual

Programmable analog inputs

The drive has three programmable analog inputs: one voltage input (0/2...10 V) and
two current inputs (0/4...20 mA). Two extra inputs are available if an optional Analog
I/O Extension Module is used. Each input can be inverted and filtered, and the
maximum and minimum values can be adjusted.

Update cycles in the Control Program

Input
AI / standard
AI / extension

Settings

Parameter
Group
Group
35.01
Group
Group
Group
Group
Group
98.06

Diagnostics

Actual Value
01.18...01.20
01.38,
Cycle
10 ms
10 ms
11 REFERENCE SELECT
13 ANALOG INPUTS
61 CORE SPEED MATCH
62 DANCER CONTROLS
63 TENSION CONTROLS
65 DIA CALC CONTROL
67 LEAD CTRL
Additional Information
Standard inputs
01.39 Optional inputs
Additional Information
Reference source
Processing of the standard inputs
Motor temperature measurement
Matching reference source
Reference and feedback sources
Reference and feedback sources
Diameter actual source
Web speed source
Activation of optional analog inputs
27
Program features