Chapter 12: How Do I - Cisco UC320W Administration Manual

How Do I
Cisco Unified Communications UC320W Administration Guide
Read the information below to find answers to common questions about
configuration tasks.
How do I upgrade the firmware?
To upgrade the firmware from a file on your PC, click the upgrade button on the
Status > Devices
page.
How do I reserve an analog phone line as a private line for an executive?
For this scenario, complete the following tasks:
Configuration > Telephony > PBX/Key System
• Use the
System mode to Key System or Blend mode to allow the configuration of
Shared FXO Lines.
• Use the Configuration > Ports and Trunks > Line (FXO) Ports page to
enable your FXO trunks.
Configuration > Users/Phones > Users
• Use the
for the executive.
Configuration > Users/Phones > Assign Phones
• Use the
phone to the executive.
Configuration > Extension Buttons > Shared FXO Lines
• Use the
create a Shared FXO Line. Add only one Member, the executive who needs
the private line.
• When finished entering settings in the system, apply the configuration. The
phone of the executive will have a phone button that displays the name that
you assigned to the line. The executive can press the button to receive and
place calls on this line. No other users will have access to this line.
12
page to set the
page to create a user record
page to assign a
page to
12
95