Chapter 10: Apply Changes; Site Summary - Cisco UC320W Administration Manual

Apply Changes

Site Summary

Cisco Unified Communications UC320W Administration Guide
In the Apply Changes section of the Configuration module, you can review your
settings and apply the configuration.
Apply Changes > Site Summary
Use the
site or the configuration and to review the settings from each module of the
configuration utility.
To review and modify settings:
• Position your mouse pointer over a tab to view the full label. Click the tab to
view a summary of the settings from the specified module.
• On each page, the settings appear in black type. Blue type indicates a link
that you can click to return to a particular configuration page.
• Remember that the settings are not applied to the devices until you apply
all changes on the Apply Configuration page. If you wish to exit without
applying your configuration, you can use the Backup/Save Session link to
save your session for later use.
page to enter any comments about the
10
10
84