Cisco UC320W Quick Start Manual
Hide thumbs
Also See for UC320W:
- Administration manual (124 pages) ,
- Configuration manual (71 pages) ,
- Pre-installation site information (29 pages)
Advertisement
Quick Links
Cisco Small Business
Unified Communications UC320W with FXO
Package Contents
• Unified Communications System
• Ethernet Network Cable
• Phone Cable
• Power Adapter
• Power Cord Retention Kit
• Quick Start Guide
• Phone Quick Reference Card
• Product CD-ROM
Be sure to read Section 1 before installation.
C
AUTION
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Quick Start Guide
Advertisement
Related Manuals for Cisco UC320W
Summary of Contents for Cisco UC320W
-
Page 1: Quick Start Guide
Quick Start Guide Cisco Small Business Unified Communications UC320W with FXO Package Contents • Unified Communications System • Ethernet Network Cable • Phone Cable • Power Adapter • Power Cord Retention Kit • Quick Start Guide • Phone Quick Reference Card •... -
Page 2: Before You Begin
DHCP server, refer to the Smart Designs (see links on page 7). Carefully follow the instructions in this guide and in the UC320W Simple Configuration Utility. IP address conflicts will result if two DHCP servers are installed on your network. -
Page 3: Installing The Equipment And Configuring The System
• ISDN BRI service: Install a Mediatrix™ 4400 Digital Gateway, Connect both the Cisco UC320W and the BRI gateway to a secure router such as Cisco SA500. For application notes, see the documentation links in Where to Go From Here, page •... - Page 4 When the device is fully booted, the POWER/SYS light is steady green. Connect your PC to a LAN port on the Cisco UC320W. Do not connect any devices to the LAN ports at this point. Your PC will receive an IP address in the 192. 1 68. 1 0.x range.
-
Page 5: Getting To Know The Cisco Uc320W
Getting to Know the Cisco UC320W Installation Guidelines • Ensure adequate air flow. • Do not stack or place anything on top of the Cisco UC320W, or install it on a hot surface. • Ensure that the Cisco UC320W is secure and stable. -
Page 6: Back Panel
Fast flashing - Setup error. Off - Not in use. To configure a WiFi connection by using WPS, make sure the wireless device is located near the Cisco UC320W, and then press and hold this button until the WPS light flashes.