Cisco UC320W Administration Manual page 25

Telephony
Devices
Cisco Unified Communications UC320W Administration Guide
not yet added phones, the file contains a sample record and can be used as
a template for data entry. If you have added phones, the file includes all
phone records. You can open the phones.csv file in a text-editing program
such as Notepad or a spreadsheet program such as Microsoft Excel.
• To enter the phone information in a CSV file: You can use a downloaded
template or create a new CSV file. Edit in a text-editing program such as
Notepad or a spreadsheet program such as Microsoft Excel. You must enter
a valid model number for each phone. Also enter the MAC address, using
the following format:
editing program, separate the values with commas, and create each entry
on a new line. In a spreadsheet program, enter each value in a separate cell,
and create each entry on a new row. If working from a template, delete the
sample record. Save the file in CSV format. You can then import the file, as
described below. Note: Valid model numbers are SPA301, SPA303,
SPA501G, SPA502G, SPA504G, SPA508G, SPA509G, SPA525G, and
SPA525G2.
• To import a CSV file: Click the Import icon to import a list of phones in a
CSV file that you have prepared. Choose the file, and then click Open. Errors
appear if any values are invalid. The imported phones appear at the bottom
of the Phones list.
• To physically replace a device: If a phone is damaged or needs to be
replaced with a different model, first disconnect it from the network by
removing its network cable from the port of the Cisco UC320W or Ethernet
switch. Then wait about 2 minutes for the Cisco UC320W to detect that the
device was removed. You can now connect the new device, which will
appear on the Devices page when it is automatically detected. You can then
use the Assign Phones page to assign the new phone to the user who
previously had the other phone.
xxxx.xxxx.xxxx
, where x is a number or letter. In a text-
3
25