Chapter 8: User/Group Features; Call Forwarding - Cisco UC320W Administration Manual

User/Group Features

Call Forwarding

Cisco Unified Communications UC320W Administration Guide
In the User/Group Features section of the Configuration module, you configure the
user and group features, such as call forwarding, voicemail-to-email notifications,
phone buttons, and the directory.
Configuration > User/Group Features > Call Forwarding
Use the
call forwarding for users and groups.
Note: For hunt groups, configure call forwarding on the Hunt Groups page.
• After (secs): Enter the number of seconds that a call can ring before it is
considered unanswered.
• To open the Users or Groups section, click the User Call Forwards or
Group Call Forwards button. To hide a section, click the button again.
• Call Forward Busy/No Answer: Choose a destination for calls that are
received when the extension is busy or the call is not answered within the
specified Call Forward Timeout period. The default selection is voicemail, if
enabled. Note: Group call forwarding also can be configured on the
configuration page for the group (such as Shared FXO Lines or hunt groups).
8
8
page to configure
69