Chapter 1: Welcome; System Requirements - Cisco UC320W Administration Manual

Welcome

System Requirements

Cisco Unified Communications UC320W Administration Guide
The Cisco UC320W Configuration Utility helps you to configure your Unified
Communications System quickly and easily.
The dynamic user interface has two modes to help you to install, configure, and
manage your Unified Communications System.
• Initial setup: When you create a new configuration, the user interface
makes it easy to connect to services, install the equipment, and configure
the features for your site. First you use the Getting Started menu to
complete the essential installation tasks. Then, in the Configuration module,
the interface guides you step by step through the configuration process. As
you work, you also can access the Status menu to view information.
• Ongoing management: When you work from an applied configuration, the
user interface makes it easy to monitor and maintain the Unified
Communications System. The Quick View page provides an overview of the
status. Use the links in the Quick View page and in the navigation tree to
view detailed information about the network, the devices, and the telephony
system. You also can view call detail records and system logs. You also can
access the Configuration menu to review or modify the settings.
• Computer with a web browser. Cisco recommends Internet Explorer
version 7 or later or Firefox version 3.6 or later. For best results, set the
screen resolution to 1024x768 or higher.
• Adobe Flash Player version 10. 1 or later.
• Cisco SPA300 Series or Cisco SPA500 Series IP phones. You can have up
to 24 users. This count includes all IP phones and all enabled FXS ports on
Cisco SPA8800 IP telephony gateways. Note: The built-in FXS port on the
Cisco UC320W also can be configured for a user and does not count
toward the 24-user limit.
1
1
9