Chapter 3: Telephony; Devices; General Information And Options For Devices - Cisco UC320W Administration Manual

Telephony

Devices

Cisco Unified Communications UC320W Administration Guide
In the Telephony section of the Configuration module, you manage the IP phones
and IP telephony gateways. You also configure the operational mode, day/night
features, internal dialing plan, and music.
Configuration > Telephony > Devices
Use the
discovered Cisco SPA8800 IP telephony gateways, IP phones and Cisco
SPA500S expansion modules, also known as attendant consoles or side cars. You
also can manually add gateways, phones and side cars that you intend to install
later.
Note: To configure Mediatrix BRI Gateways, see the

General Information and Options for Devices

• Devices are automatically discovered when they are connected to the
network. Each device is listed by its model number and MAC address.
• If phones are assigned to users, the user names appear (not applicable
when creating a new configuration). Note: Phones are assigned to users on
Assign Phones
the
• Icons provide more information:
- Check mark: The device is currently available.
- Plus sign: The device was added manually.
- Question mark: The device previously was active, but its current state is
unknown.
- Exclamation point: The device cannot be configured due to capacity
limits. You can add up to two Cisco SPA8800 IP telephony gateways and
page to review the automatically
page.
3
SIP/BRI Trunks
page.
3
23