Backing Up And Restoring The Configuration - Cisco UC320W Administration Manual

Small business unified communications
Table of Contents

Advertisement

Welcome
Configuration Module Overview
Cisco Unified Communications UC320W Administration Guide
Load applied configuration from the device: This option allows you to
abandon your unsaved changes and reload the currently applied settings
into the configuration utility for editing. After you choose this option, click
Load.
Resume session from a saved file: Choose this option to resume a session
that was saved to your PC by using the Save button. Click the radio button,
and then click Choose File to select the file from your PC. Finally, click Load.
Note: The existing administrator username and password are not saved in the
session file and therefore are not overwritten when you reload a session. Continue
to log on with your current username and password.

Backing Up and Restoring the Configuration

You can save the currently applied configuration as a file on your PC, or you can
create a full site backup including the site configuration, recorded prompts, and
voicemail messages by using a USB key. You easily can restore a saved
configuration or a full site backup.
As a best practice, you should save the configuration or create a full site backup
before you make significant changes in your configuration. Then if you are
unhappy with your changes, you easily can restore the previous configuration.
IMPORTANT: After restoring a configuration file, log in, and then re-apply the
configuration.
Note:
To allow file transfers, temporarily disable the pop-up blocker in your web
browser's Internet options.
The Full Site Backup option is available only after you have applied a
configuration.
Voicemail access is interrupted while the backup is being saved. Therefore,
Cisco recommends performing this procedure during a period when users
and callers are unlikely to require voicemail access.
To back up or restore the configuration, click the Backup/Restore link near the top
right corner of the configuration utility window. In the Backup/Restore window,
choose one of the options described below.
Note: Due to the large file size, do not use a wireless connection to back up the
configuration.
1
16

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents