Blend; Day/Night Features; Call Scheduling - Cisco UC320W Administration Manual

Telephony

Day/Night Features

Day/Night Features
Cisco Unified Communications UC320W Administration Guide
configured your system in another mode, any existing SIP/BRI trunks will be
removed.
• Outbound dialing: You cannot use a personal extension to place a call to an
external number. Extensions are for internal calls. For outbound calls, use a
shared line button.
• Internal Dial Plan: No outbound dialing digit is required. For example, you
do not have to dial 9 to get an outside line. Simply select a shared line
button.
• Inbound Routing: Configure inbound routing for each trunk on the Shared
FXO Lines page. The Inbound Calls page is unavailable.

Blend

The system functions like a PBX, as described above, but allows the configuration
of shared FXO (analog) lines, as in a Key System. Outbound calls require a steering
digit except when a Shared FXO Line is selected by pressing a shared line button
on a phone. Both FXO (analog) lines and SIP/BRI trunks may be used. All features
are available for configuration.
Configuration > Telephony > Day/Night Features page
Use the
scheduling options for inbound call routing and the Auto Attendant (if enabled).

Call Scheduling

Call Routing
If needed, you can enable different call routing options when your business is
opened or closed. Choose a scheduling option.
• Single Schedule Call Routing: Click this button to use the same call routing
settings for all times of day. You will configure these settings on the Inbound
Calls page.
• Day / Night Call Routing: Click this button to enable different call routing
destinations for day (your open hours) and night (your closed hours).
Selecting this option makes day/night settings available for inbound call
routing and call forwarding.
3
to choose the
27