Standard Finisher Plus Specifications; Finisher Module Specifications - Xerox Versant 80 Press User Manual

Standard Finisher Plus
Tip
Always ensure that all paper jams, including any small ripped pieces of paper, are cleared
before proceeding with your print jobs. If paper is torn, check inside the Finishing
Transport and remove it.
1. Open the Finishing Transport front door.
2. Grasp the green handle 4 and gently pull toward the right.
3. Remove the jammed paper.
4. Check for and remove any jammed paper between the Finishing Transport exit and
the entrance to the attached third-party device.
5. Return the green handle 4 to its original position.
6. Close the Finishing Transport front door.
7. Ensure that the paper jam indication is cleared from the Finishing Transport status
display.
8. Follow the instructions on the press to restart your print job.

Standard Finisher Plus Specifications

Finisher Module Specifications

Item
Tray Type
• Top Tray: Collated / Uncollated
• Stacker (middle) Tray: Collated / Uncollated (Offset available)
26-12
Specification
®
Xerox Versant
®
80 Press
User Guide