Xerox Versant 80 Press User Manual page 306

GBC AdvancedPunch Pro
Jam Area Jam Clearance Solution
If paper is jammed in Areas 3 and / or 5, perform the following steps:
1.
2. If there is not any paper found in these two areas, then
3. Remove any jammed paper.
4. Reinstall the die set into the punch unit.
22-26
Before removing a die set from the punch unit, ensure
Areas 3 and 5 are clear of any jammed paper.
remove the die set from the punch unit; refer to
Die Sets in the AdvancedPunch Pro (Removing /
Changing
Installing).
® ®
Xerox Versant 80 Press
User Guide