Fault Codes - Interface Module / Interface Cooling Module - Xerox Versant 80 Press User Manual

Press Problem Solving
Fault Code Possible Cause
012-231 - 012-234, Problems in the finisher punch
012-247, 024-926, 024-
963, 112-700
012-243, 012-246, 012- Problems in the optional booklet
265, 012-266, 012-269, maker
012-292, 012-297, 012-
307, 012-319, 012-983,
012-984, 012-989
012-291, 012-295, 012- Problems with the finisher stapler
296 - 024-979, 024- or booklet stapler
987, 024-988, 124-711,
124-712, 124-713

Fault Codes - Interface Module / Interface Cooling Module

Fault Code Possible Cause
048-100 to 048-107 Paper Jam during feeding
048-300 Module front door is open
048-310, 048-311, 048- Decurler Sensor or Belt issue
312, 048-313, 048-314,
048-315, 048-316
048-317, 048-318, 048- Cooling fan failure
319
14-26
Recommended Solution
1. Power Off / On the press.
2. If error persists, contact
the Customer Support
Center.
1. Power Off / On the press.
2. If error persists, contact
the Customer Support
Center.
1. Power Off / On the press.
2. If error persists, contact
the Customer Support
Center.
Recommended Solution
1. Open the Module front
door.
2. Remove all sheets or
pieces from the jam clear-
ance areas.
3. Close the front door.
4. Verify that the paper be-
ing used is within specifica-
tions.
Ensure door is fully closed.
1. Power Off / On the press.
2. If error persists, contact
the Customer Support
Center.
1. Power Off / On the press.
2. If error persists, contact
the Customer Support
Center.
® ®
Xerox Versant 80 Press
User Guide