Low Power Mode; Sleep Mode; Exiting Energy (Power) Saver Mode; Power On/Off - Xerox Versant 80 Press User Manual

Low Power Mode

In this mode, the power to the User Interface (UI) and fuser unit is lowered to save
power. The display goes out and the Energy Saver button on the UI lights. To use the
press, press the Energy Saver button. The Energy Saver button is no longer lit, indicating
that the Energy Saver feature is canceled.

Sleep Mode

In this mode, the power is lowered more than in the Low Power mode. The display goes
out and the Energy Saver button on the UI lights. To use the press, press the Energy
Saver button. The Energy Saver button is no longer lit, indicating that the Energy Saver
feature is canceled.

Exiting Energy (Power) Saver Mode

The press exits Energy (Power) Saver mode by doing one of the following:
• Pressing the Power / Energy Saver button on the press UI,
• Receiving print data for an incoming job to be printed, or
• Programming and performing a copy or scan job.

Power On/Off

The Power Switches

There are three power switches involved with the press:
• The Breaker switch located at the rear of the press. Initially check to make sure this
switch is set to On when the press is shipped.
• The Main Power switch located inside the Front Door. This switch is used mainly by
the Xerox Service Representative when servicing the press. In rare problem solving
cases, you may be directed to power off the press with this switch.
® ®
Xerox Versant 80 Press
User Guide
Product Overview
1-7