Module Overview; Module Control Panel - Xerox Versant 80 Press User Manual

Interface Module / Interface Cooling Module
• Booklet Maker Finisher
• Standard Finisher Plus
Optional Performance Package
Note
If the optional Performance Package is purchased, the Interface Cooling Module is
required (regardless of any additional finishing devices). The Performance Package
cannot be used with the Interface Module.
For more information on this optional package, refer to
in the first chapter of this guide.

Module Overview

Module Control Panel

The Control Panel consists of the following:
1. Auto Curl button: This button selects the Auto Decurl function.
2. Manual Curl Up button: This button selects the three values of manual up curl.
3. Manual Curl Down button: This button selects the three values of manual down
curl.
4. Curl Up / Down indicators: These indicate the amount of manual curl (up or down)
that is selected.
5. Auto Curl indicator: This indicates that the Auto Curl Mode is selected.
If you want to quickly and at the point-of-need adjust the paper curl on the printed
output, you may use the Manual Curl Up or Down buttons. If the printed output contains
too much curl after using these buttons, refer to the System Administration Guide for
information on adjusting the paper curl. The paper curl buttons are discussed in more
detail later in this section.
20-2
Optional Performance Package
® ®
Xerox Versant 80 Press
User Guide