Squarefold Trimmer Module Jam Clearance; Jam Clearance Overview; Clearing Jams - Xerox Versant 80 Press User Manual

SquareFold Trimmer Module

SquareFold Trimmer Module Jam Clearance

Jam Clearance Overview

Note
The top covers cannot be opened during normal operation or when the machine is idle.
The covers can be opened only when an indicator is lit and a jam/fault occurs within the
SquareFold Trimmer Module.
The paper path is shown in the above illustration. If a jam occurs, the machine stops
printing and a message may display on the press touch screen. Clear any paper jams
along the paper path.
Note
To determine if the jam / fault is within the finisher or the SquareFold Trimmer Module,
always begin troubleshooting at the SquareFold Trimmer Module.

Clearing Jams

Use the following procedure to clear jams or faults and then resume printing:
1. Follow any instructions displayed on the press User Interface (UI) and the SquareFold
Trimmer Module control panel.
2. Open the Top Left Cover and the Top Right Cover of the module and look for any
jammed booklets in the paper path, and remove them.
3. Check for loose trim scraps in the paper path and remove them.
4. Close the Top Left and Right Covers.
5. Empty the Trimmer Waste Container. Ensure it is inserted completely.
6. Ensure that all covers on the module are closed.
7. If there is still a jam, open the finisher to look for paper jams along the finisher path.
8. If the press does not resume printing, follow the instructions displayed on the press
UI.
25-12
® ®
Xerox Versant 80 Press
User Guide