Pre-Punch Job Checkpoints - Xerox Versant 80 Press User Manual

5. Properly store the removed Punch Die Set in the Die Set storage area at the top of
the AdvancedPunch.
This keeps it away from dust, dirt, and accidental falls from the edge of counters.
6. Select the desired Punch Die Set for your new job and slide it into the Punch Die Set
slot. Push the die set in firmly until it latches.
Note
Possible pinch-point hazard. When installing the punch die set, always keep fingers
and other body parts out of the unit's die set slot and away from all areas of the
punch die set, except for the finger hole in the die set. Failure to follow these
precautions may result in injury.
7. Close the door panel.
8. Proceed with your printing and punching job.
Note
Please note that when using a new die, some oil will be present around the punched
holes on the sheet. After punching 25 to 50 sheets the die will no longer leave oil on
the sheets. It is recommended that a short test print job be run after installing a new
die or a die that has recently been oiled.

Pre-Punch Job Checkpoints

Prior to beginning a job in which the punching feature of the AdvancedPunch will be
used, perform the following checkpoints:
1. Ensure that no yellow LED indicators are illuminated on the front panel of the
AdvancedPunch.
2. If a yellow LED indicator is illuminated, then correct the fault prior to starting the
punch job.
Note
The AdvancedPunch will not operate in punch mode if any yellow LED is illuminated.
3. Prior to starting the punch job, ensure that the punch die installed in the
AdvancedPunch is the correct die / hole pattern for the job.
4. If the die is not the correct die, then replace it at this time.
5. To enable the AdvancedPunch punching feature, use the press User Interface.
a) From the press User Interface, select to the Copy feature from the main home
screen.
b) Select Copy Output to enter the Hole Punch & More menu.
c) From the Hole Punch & More menu select the AdvancedPunch option from the
hole punch column.
d) Select Save.
The main Copy feature displays. The AdvancedPunch will now operate in the
punch mode.
® ®
Xerox Versant 80 Press
User Guide
GBC AdvancedPunch
21-5