Hcs General Problems; Hcs Jam Clearance; Hcs Jam Clearance Overview - Xerox Versant 80 Press User Manual

Fault Code Possible Cause
049-973 HCS falsely detects that the
Paper Unload button is pressed

HCS General Problems

Problem Cause
HCS tampers Problem occurs when printing with
no longer in Clear dry ink/toner and using me-
contact with dia that is 120 gsm, coated, and
paper large stock sizes (such as 12 x 18
in./304.8 x 457.2 mm).
Loss of Power to the HCS
If power is interrupted to the High Capacity Stacker, perform the following:
1. Ensure that the power cord is plugged in to the proper wall receptacle.
2. Ensure that the press power is switched on.
3. Ensure that the Ground Fault Indicator is in the On position.
4. If the power has not been restored by checking the above items, then call for Service.

HCS Jam Clearance

HCS Jam Clearance Overview

Tip
Always ensure that all paper jams, including any small ripped pieces of paper, are cleared
before proceeding with your print jobs.
Note
Remedies differ according to the paper jam location. Follow the instructions displayed
to remove the jammed paper.
® ®
Xerox Versant 80 Press
User Guide
High Capacity Stacker (HCS)
Recommended Solution
Open the HCS front door and remove
any paper from the Stacker cart. Close
the door to resume operation.
Remedy
Adjust the paper curl before printing the
job. Refer to the System Administration
Guide for specific information on paper curl
settings and adjustment.
23-5