Advancedpunch Pro Maintenance; Ordering Supplies For The Advancedpunch Pro - Xerox Versant 80 Press User Manual

GBC AdvancedPunch Pro
• If changing the die stop position on a die set that is currently installed in the
AdvancedPunch Pro, remove the die set from the punch. Refer to
Sets in the AdvancedPunch Pro (Removing /
• If changing the die stop position on a currently stored die set (one that is not in
the AdvancedPunch Pro), retrieve that die set from its storage area.
2. Place the die set on a flat surface, such as a table.
3. While holding the die set in a stable position, push down on the Die Stop Knob until
it is free to rotate.
4. Rotate the Die Stop Knob until the arrow on the knob lines up with the desired Die
Stop Arrow (as indicated on the Die Stop Handle Label).
5. When the arrows align, release the Die Stop Knob.
6. Ensure that the Metal Die Stop on the bottom fully seats against the Die Plate.
7. Choose one of the following:
• Reinstall the Die Set in the AdvancedPunch Pro.
• Return the Die Set to the storage area.

AdvancedPunch Pro Maintenance

Ordering Supplies for the AdvancedPunch Pro

Die Sets can be ordered from the web site www.xerox.com. Search for your press and
then click on the Supplies link. For any item that is not orderable from the web site,
contact your Xerox Service Representative.
The following Die Sets are available for ordering:
CRUs (Supply Item)
Die Set, Xerox, Comb Bind
22-20
Installing).
Reorder Quantity
1 per box
Xerox
Changing Die
® ®
Versant 80 Press
User Guide