Xerox Versant 80 Press User Manual page 180

Press Problem Solving
Fault Area Fault code
091-920, 091-
924
091-922, 091-
925
091-923, 091-
926
091-915, 091-
916
Process Control 092-333
093-3[00-99],
093-4[00-99],
093-6[00-99],
093-9[00-99]
Transfer 094-312, 094-
318
099-339
099-[000-
999]
099-340
14-18
Possible cause
CRUM data is damaged
CRUM data is damaged
CRUM data is damaged
CRUM data is damaged
Software error
Dry Ink/Toner Cartridge
Transfer Belt or Roll fault
Fuser Belt in Limit Fail
General Fuser faults
Fuser Belt Out Limit Fail
Recommended solution
Reseat the Drum Unit (Y);
Switch Drum Units; If prob-
lem persists, replace Drum
Unit (Y).
Reseat the Drum Unit (M);
Switch Drum Units; If prob-
lem persists, replace Drum
Unit (M).
Reseat the Drum Unit (C);
Switch Drum Units; If prob-
lem persists, replace Drum
Unit (C).
Reseat the Drum Unit (K);
Switch Drum Units; If prob-
lem persists, replace Drum
Unit (K).
Power Off/On the press.
If error persists, contact the
Customer Support Center.
Replace/Reinsert Cartridge.
Ensure Doors are closed.
Power Off/On the press. Con-
tact Customer Support.
Power Off/On the press.
If error persists, contact the
Customer Support Center.
Fuser Belt Assembly is out of
position. Reseat the assembly
and make sure the Belt Edge
Sensor is in contact with the
belt edge.
Power Off/On the press.
If error persists, contact the
Customer Support Center.
Fuser Belt Assembly is out of
position. Reseat the assembly
and make sure the Belt Edge
Sensor is in contact with the
belt edge.
® ®
Xerox Versant 80 Press
User Guide