Xerox Versant 80 Press User Manual page 185

Fault Area Fault Code
Bypass (Tray 178-120, 078-
5) 125, 078-126,
078-127
Tray 8 178-100, 178-
101
Trays 5 (By- 178-103
pass), 8, and
9
Trays 8 and 9 078-125, 078-
126, 078-127,
178-106, 178-
156
® ®
Xerox Versant 80 Press
User Guide
Possible Cause Recommended Solution
Repetitive misfeeds or 1. Fan the paper to eliminate pa-
multifeeds
2. Clean the Bypass Tray feed, re-
3. Replace feed rolls (feed, retard,
4.
Pre-registration sensor Perform the following in this order:
jam; during paper 1. Remove or clear any jammed
transportation, feed
sensor is not turned on
2.
within period of time
paper is transporting
3.
from tray
Repetitive misfeeds or 1. Fan the paper to eliminate pa-
multifeeds
2. Check the position of Skew Ad-
3. Replace the tray feed rolls (feed,
4.
Press Problem Solving
per adhesion (especially in high
humidity or high temperature
environments).
tard, and nudger rolls with a
damp cloth.
nudger); refer to Replacing the
Bypass Tray Feed Rolls for the
OHCF (Trays 8 and 9).
If problem persists, Call for ser-
vice.
paper.
Replace and fan the paper in
tray.
Replace the OHCF Feed Rolls;
refer to Replacing the OHCF
Feed Rolls for the OHCF (Trays
8 and 9).
per adhesion (especially in high
humidity or high temperature
environments).
justment Levers. The levers
should be retracted.; refer to
Skew Adjustment Levers (Trays
8 and 9).
retard, nudger); refer to Repla-
cing the OHCF Feed Rolls for the
OHCF (Trays 8 and 9).
If problem persists, Call for ser-
vice.
14-23