Interface Module / Interface Cooling Module; Overview Of The Interface Module / Interface Cooling Module - Xerox Versant 80 Press User Manual

20
Interface Module /
Interface Cooling Module
Overview of the Interface Module /
Interface Cooling Module
The Interface Module or Interface Cooling Module is an optional finishing device that
is used in conjunction with other optional finishing devices.
What is the Difference Between the Two Modules?
Both modules enable communication and provide a paper path between the press and
any attached finishing device / devices. The Interface Cooling Module contains additional
fans and associated duct work. These fans and duct work aid in cooling the outgoing
printed media. The Interface Cooling Module is also equipped with an internal
spectrophotometer.
Finishing Devices that Require Either Module
The following finishing devices require either the Interface Module or the Interface
Cooling Module:
• GBC AdvancedPunch
• High Capacity Stacker (HCS)
• Standard Finisher
® ®
Xerox Versant 80 Press 20-1
User Guide