Xerox Versant 80 Press User Manual page 221

Note
If an error code appears that is not listed in the table below, or if an error persists after
following the listed solution, then contact the Xerox Customer Support Center.
Fault Code Cause
024-955 Tray 6 is empty/out of paper.
024-974 The designated paper size and
size of paper in the tray differ
when feeding paper from the
inserter.
078-100, 078- (Optional) Paper Tray 6 malfunc-
101, 078-102, tioned.
078-151
078-250 The high capacity tray (the Tray
6) malfunctioned.
078-260, 078- (Optional) Paper Tray 6 malfunc-
261, 078-262, tioned.
078-263, 078-
264, 078-265,
078-266, 078-
267, 078-268,
078-269, 078-
270, 078-271,
078-272, 078-
273, 078-274,
078-275, 078-
276, 078-277,
078-278, 078-
279, 078-280,
078-300, 078-
301, 078-500,
078-901, 078-
941, 078-942,
078-943
® ®
Xerox Versant 80 Press
User Guide
1-Tray High Capacity Feeder (HCF / Tray 6), Letter-Size / A4 Only
Remedy
Add paper to Tray 6.
Reset the paper or cancel the job.
1. Check the paper loaded in Tray 6.
2. Power off and then power on the
machine.
3. If the tray errors are not fixed by
performing the relevant remedy,
contact the Customer Support
Center.
Power-cycle the machine. If the machine is
not improved by performing the relevant
remedy, contact your Xerox Customer Sup-
port Center.
1. Check the paper loaded in Tray 6.
2. Power off and then power on the
machine.
3. If the tray errors are not fixed by
performing the relevant remedy,
contact the Customer Support
Center.
16-3