Procedures For Replacing Consumables; Replacing Consumable Supplies; Ordering Supplies - Xerox Versant 80 Press User Manual

Press Maintenance

Procedures for Replacing Consumables

Replacing Consumable Supplies

The following items are the Customer Replaceable Units (CRU) for the press. It is
recommended that you have a supply of these items available to eliminate down time
when they need to be replaced.
• Dry Ink/Toner cartridges (C, M, Y, K)
• Drum cartridges (C, M, Y, K)
• An empty Waste Dry Ink/Toner bottle
• Suction Filter
Refer to www.xerox.com for the latest consumable part numbers.
Note
The Fuser Module may be replaced by the customer only if directed to do so by Service.
Note
Store supply items and Xerox parts in their original packages in a convenient location.
Always recycle/dispose the used CRU according to the disposal instructions supplied
with the new CRU.

Ordering Supplies

Xerox supplies, paper, and throughput material can be ordered from the web site
www.xerox.com and clicking on the Supplies link. For any item that is not orderable from
the web site, contact your Xerox Service Representative.
Note
The cleaning pads used with the ROS Window cleaning wand are not orderable. Contact
your Xerox representative for any additional cleaning pads.
CRUs (Supply Item)
Black Dry Ink/Toner Cartridge
Cyan Dry Ink/Toner Cartridge
Magenta Dry Ink/Toner Cartridge
Yellow Dry Ink/Toner Cartridge
Waste Dry Ink/Toner Bottle
13-6
Reorder Quantity Approximate Print Yield (Full
Color 8.5x11/A4 Prints)
2 per box 50,000
1 per box 55,000
1 per box 51,000
1 per box 51,000
1 45,000
® ®
Xerox Versant 80 Press
User Guide