Cleaning The Document Feeder Rollers - Xerox Versant 80 Press User Manual

Part of the document cover pulls away from the assembly, which allows better
access to the second-side scanning lens assembly.
c) To remove dirt, wipe the mirrored glass, metal strip, both sides of the white-plastic
strip, and the rollers with a soft cloth moistened with water, and then wipe it dry
with a soft cloth.
Caution
Do not press heavily on the mirrored glass as this will result in damage to the
film around the glass surface.
Note
If dirt is difficult to remove, try gently wiping with a soft cloth moistened with a
small amount of neutral detergent.
4. Once the second-side scanning assembly is clean, return the document cover to its
original position and ensure that the lever is locked in place.
If you touch the document cover with your bare hands, wipe it clean before closing
the document feeder.
5. Gently close the document feeder.

Cleaning the Document Feeder Rollers

1. Gently lift the latch of the document feeder top cover until it is open completely in
a fixed position.
® ®
Xerox Versant 80 Press
User Guide
Press Maintenance
13-3