Xerox Versant 80 Press User Manual page 183

Fault Area Fault Code
Bypass Tray 078-110
Bypass Tray 078-111
Tray 6 078-100,
078-101,
078-102,
078-103
Tray 7 078-150,
078-151
® ®
Xerox Versant 80 Press
User Guide
Possible Cause Recommended Solution
Pre-registration sensor jam Perform the following in this order:
during paper transporta- 1.
tion from Bypass Tray
2.
Regi sensor not turned on
fault during paper trans-
3.
portation from Bypass
Tray
4.
Pre-registration sensor Perform the following in this order:
jam; during paper trans- 1.
portation, feed sensor is
not turned on within peri-
2.
od of time paper is trans-
porting from tray
3.
Pre-registration or feed Perform the following in this order:
sensor jam during paper 1.
transportation from Tray
7
2.
3.
Press Problem Solving
Remove or clear any
jammed paper.
Replace and fan the paper
in tray.
Power Off / On the press.
If problem still persists,
contact the Customer Sup-
port Center.
Remove or clear any
jammed paper.
Replace and fan the paper
in tray.
Replace the OHCF Feed
Rolls; refer to Replacing the
OHCF Feed Rolls (Trays 6
and 7).
Remove or clear any
jammed paper.
Replace and fan the paper
in tray.
Replace the OHCF Feed
Rolls; refer to Replacing the
OHCF Feed Rolls (Trays 6
and 7).
14-21