GBC AdvancedPunch
Cause
Punch Die Set will not come out when
using a moderate pull or the set is in
partial cycle
GBC AdvancedPunch Jam Clearance
Clearing Jams in the AdvancedPunch
This symbol indicates a paper jam. To assist in clearing paper jams in any
of the following areas, turn one or more of the small knobs to advance
the paper.
Jam Area
Jam Clearance Solution
If paper is jammed in the Punch Bypass, lift the paper guide plate
located inside, and remove the jammed paper.
If paper is jammed in the downward paper path chute, move the door
to the right, remove the jammed paper.
If paper is jammed or the Punch Die Set is jammed, turn Knob J3 to
the HOME position, (arrows line up), slide the Die Set out, and remove
the jammed paper.
If paper is jammed in the bottom chute of the Punch Paper path,
press the bottom chute latch,and remove any jammed paper.
If paper is jammed in the upward paper path chute, move the door
to the left, and remove the jammed paper.
21-8
Remedy
Turn the Punch Die Set knob (J3) to the Home position.
The Home position is when the arrows line up.
The Die Set should now slide out easily.
®
®
Xerox
Versant
80 Press
User Guide