Ohcf (Trays 8 And 9) Jam Clearance; Clearing Ohcf (Trays 8 / 9) Jams; Paper Jams When The Bypass Is Installed On Trays 8 And 9 - Xerox Versant 80 Press User Manual

Chained (Second) Oversized High Capacity Feeder (OHCF / Trays 8 and 9)
Fault Area Fault Code
Trays 8, 9 and 178-217, 178-
Bypass 218, 178-[224-
229], 178-230,
178-232, 178-
250, 178-251,
178-[260-281],
178-[285-291],
178-[293-294],
178-298
Trays 8 and 9 178-304
Trays 8 and 9 178-400 - 178-
405
Trays 8 and 9 178-900 - 178-
904

OHCF (Trays 8 and 9) Jam Clearance

Clearing OHCF (Trays 8 / 9) Jams

Nip Release levers inside of the Transport area of the Feeder hold back large size sheets
(such as A3, 11 x 17 inches, 12 x 18 inches) to reduce the chance of jamming as paper
enters the print engine.
Note
Follow the jam clearance instructions displayed on the touch screen. Always ensure that
all paper jams, including any small ripped pieces of paper, are cleared before proceeding
with your print jobs.

Paper Jams When the Bypass is Installed on Trays 8 and 9

Tip
Always ensure that all paper jams, including any small, ripped pieces of paper, are cleared
before proceeding with any print jobs.
1. Remove the paper currently loaded in the Bypass (Tray 5).
18-10
Possible Cause Recommended Solution
General tray malfunc- 1. Remove or clear any jammed
tion
2. Replace and fan the paper in
3. Power Off / On the press.
4. If problem still persists, contact
OHCF Front Door Close the front door / cover of the OHCF.
Open
An OHCF feed, nudger, Replace the feed rolls; refer to
or retard roll is near the OHCF Feed Rolls for the OHCF
end of life (Trays 8 and 9)
Multiple feed of 1. Remove or clear any jammed
sheets / paper jam
2. Replace and fan the paper in
3. Power Off / On the press.
4. If problem still persists, contact
paper.
tray.
the Customer Support Center.
Replacing
paper.
tray.
the Customer Support Center.
® ®
Xerox Versant 80 Press
User Guide