Cisco D9865 Installation And Operation Manual page 30

About the Front Panel,
Keyboard Display
Press the MENU and SELECT buttons simultaneously on the Front Panel to display
a keyboard on the TV monitor. The keyboard allows alphabetical and numerical
character entry in menu fields using the front panel. Alternatively, press the red
button on the remote control.
Note: You must have a menu field selected (i.e., must be in edit mode) to display
the keyboard.
1. Use the arrow buttons to move along the keyboard.
2. Press OK to select a number or letter for each entry.
Setting the TV Video Format
The video format is set to the standard format for your country. Check with your
satellite or local service provider before changing this setting to ensure it is set
correctly. If you are instructed to change this setting for your TV set:
1. Press the SELECT and
2. Press SELECT and
panel (e.g., NTSC, PAL, etc).
3. Press
screen.
4. Press SELECT to save the setting and re-display the selected channel.
Note: You must be in video mode (i.e., on-screen menus not displayed) to
perform this function on the receiver front panel.
Note: This function is not available through the remote control.
3-4
Continued

buttons on the receiver front panel at the same time.

again. The video format is displayed on the receiver front

until you display your video format. Each change is viewable on-
D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C