Cisco D9865 Installation And Operation Manual page 186

Configuring Lock Level Settings,
Changing the Lock Level Password
A unique lock level password (4-digit password) protects the current receiver
settings against unauthorized changes. When changing the password, record and
keep this number in a secure location. The default password is 1234.
Important: Proceed with caution when changing the password as this operation
cannot be undone. If the password is lost or is unavailable, contact Cisco customer
support.
To change the lock level password:
1. In the Lock Level Settings page, click Change Lock Level Password. The
Change Lock Level Password window is displayed.
2. Enter the Current lock level Password.
3. In the Enter New Password field, enter the new password, any number from 0
to 9.
4. Re-enter the New Password and click Yes. A message appears informing you
that the password was changed successfully.
Note: If the password is lost or is unavailable, contact Cisco customer support.
5-66
Continued
D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C