Cisco D9865 Installation And Operation Manual page 202

Alarm Message
Type
CAM/CI Slot Set
Status
Clear
CI Status Set
Clear
Shutdown Event Set
7-4
Message
Initialization Fail
CAM Operation OK
Program Not
Descrambled
Descrambling OK
DL APP REBOOT
I2C Failure
User requested APP
change
User requested
factory reset
User requested
reboot
PRODUCTION -
Protect Flash
WDOG requesting
shutdown shell
command
WDOG shutdown
shell command
D9865 Satellite Receiver Installation and Operation Guide
Cause/Remedy
Cause: CAM is
damaged or not fully
inserted
Remedy: Re-insert
the CAM.
Cause: Hardware
issue, CAM software
crash or you don't
have subscription
rights for the smart
card.
Remedy: Reinsert the
CAM and/or check
your rights for the
smart card.
Cause: User request
requires reboot or
internal system error.
Remedy: If it is an
internal system error
fault, clear alarms,
reset the unit, notify
customer service if
the problem persists.
Description Severity
Initialization of Minor
CAM failed.
All elementary Minor
streams for this
service selected
for descrambling
were not
descrambled by
the CAM.
New application Major
downloaded,
system requires
reboot.
Internal system
error.
Runnable
application
change requires
reboot.
Factory reset
requires reboot.
User reboot
request.
Reboot after
production
tables removed.
User entered
command
requesting
shutdown
4035197 Rev C