Cisco D9865 Installation And Operation Manual page 216

Warning
HDMI:Not an Auth
Device
TV-Out Settings
Problem
7-18
Message Message
Type
Set HDCP authentication
failed
Receiver not HDCP
capable
Clear HDCP
Authentication
Process Not Started
HDCP authentication
success
Set Invalid configuration
data
Clear Valid configuration
data
D9865 Satellite Receiver Installation and Operation Guide
Cause/Remedy
Cause: HDMI monitor is
not authorized to receive
HDMI content or it does
not support HDCP.
Remedy: Disconnect HDMI
monitor to restore video
decode or use an HDMI
monitor that properly
supports HDCP.
Cause: Incorrect video
setup settings.
Remedy: Check the video
setup settings: TV Channel
Number and SD Video
Output format. For PAL
device, use channel 21
through 69 and SD Format
PAL-x. For NTSC device,
use channel 3 or 4 and SD
Format NTSC or NTSC-J.
Notify customer service if
problem persists.
Description
HDMI monitor does
not contain valid
HDCP keys. Video
decode is disabled.
HDMI monitor does
not support HDCP.
Video decode is
disabled.
HDMI monitor is not
connected.
Connect an HDMI or
DVI capable monitor,
if desired.
HDMI monitor is
connected and
authorized to receive
HDMI content.
Invalid TV-Out
configuration data
provided.
Valid TV-Out
configuration data
provided.
4035197 Rev C