Cisco D9865 Installation And Operation Manual page 54

Selection
Signal Lock
Signal Quality
Signal Level
Note: If you enter an invalid frequency setting or a setting that does not correspond
to the selection, a pop-up message such as "Input value out of range" is displayed.
3. Press the green button (Save) to save and apply the settings to the receiver.
4-20
Options
Indicates signal synchronization status.
Indicates the quality of the received signal,
associated with the Bit Error Rate, in the
range from 0 to 100.
Indicates the strength of the received
signal in the range from 0 to 100.
D9865 Satellite Receiver Installation and Operation Guide
Description Default
4035197 Rev C