Cisco D9865 Installation And Operation Manual page 150

If you set by
Stream Type
Stream Type: User Set Mode to Stream, Stream Category to User, manually
9. If you know the PID number, ensure that PID is selected under Mode and enter
the appropriate PID number. Click Apply.
10. To enter the stream type, select Stream under Mode, select the stream type in
the Stream Category (Vid, Aud, Subt, or TTX) and enter the instance of the
stream type in Stream Instance. You can enter a range from 1 to 64. Click Apply.
11. If you do not know the stream type, you can specify a specific hex value as the
stream type. Select Stream under Mode, select User under Stream Category,
enter the hex value of the stream under Stream Type value (hex) and the
instance of the customized stream type in Stream Instance. You can enter a two
digit hexadecimal value for the Stream Type and a range from 1 to 64 for the
Stream Instance. Click Apply.
12. To delete a record, identify the record you want to remove and click Delete.
13. Scroll down to view the CI Status information:
The following table describes the CI Status:
Sys Name
Comp Name
Manufacture Code
Manufacture ID
Serial Number
5-30
Set Mode to Stream, select Stream Category (audio,
video, subtitle, ttx, or user) and enter Stream Instance of
the stream type.
There is an additional configuration if you select user as
the Stream Category (see below).
enter the stream code in Stream Type Value, and then
the Stream Instance of the stream type.
CI Status
System name of the CAM.
The company name of the CAM.
The manufacturer's code.
The factory loaded application number of the CAM.
The unique serial number of the CAM.
D9865 Satellite Receiver Installation and Operation Guide
Parameter Settings
Description
4035197 Rev C