Performing Service Actions - Cisco D9865 Installation And Operation Manual

Performing Service Actions

To Load a Software Version
Proceed as follows to load a software version:
1. From the user interface of the D9865, click Support > Service Actions. The
Service Actions page is displayed.
The S/W Version drop-down list allows you to select a different application version
application to load to your receiver. Click Select and Reboot to load the selected
application version and reboot the receiver.
Click Erase to remove the selected application version. You will be prompted to
continue or not. Press OK to continue the deletion.
Click Factory Reset to perform a reset of receiver settings back to the factory set
(default) values. A warning message prompts you to confirm the operation. Click
OK to continue or No to cancel the operation.
Click Reboot Receiver to reboot the receiver. You will be prompted to verify the
operation. Click Yes to reboot the receiver or No to cancel the operation.
To Change the Download Application
In the Download APP section, click Browse to select the new version of the D9865
Satellite Receiver's software application. The Choose File dialog opens. Select the
upgrade file and click Open. Click Download to download the selected upgrade
file.
4035197 Rev C D9865 Satellite Receiver Installation and Operation Guide 5-71