Send Trap
(D9865D only)
To configure the Warning settings
1. From the Alarms & Warnings screen, press the blue button (Warning) on the
remote control.
2. Set the following warning options:
Warning Setting
Warning Name
Warning Enable
Send Trap
(D9865D only)
4-68
When set to Yes, the SNMP trap message will be
sent to the trap destination; otherwise the fault
message will be ignored.
Displays a list of the warning messages. You can
scroll through the list using the
When set to Yes, the warning message will be
reported. When set to No, the fault won't be
reported.
When set to Yes, the SNMP trap message will be
sent to the trap destination; otherwise the warning
message will be ignored.
D9865 Satellite Receiver Installation and Operation Guide
Description
buttons.
4035197 Rev C